15m ( 49.5ft ) Atlona 14 Gauge Flat Speaker Cable. Model# AT12214-15
Atlona 14 gauge Flat speaker cable is for anyone, who likes a better sound. Unlike round cables, these flat cables are perfect for running anywhere, including the walls. The jacket is white and paintable, which means that you can make this cable absolutely invisible. These cables are heavier gauge when comparing to other flat cables. Unlike thin cables, thicker cables are capable of handling a much higher amperage. Higher amperage means that the lower frequency transfer capabilities are greatly improved, which results in a much deeper and more responsive bass. In this cable two conductors were place further apart than in most cables to allow a simpler attachment to the wall with just nails, unlike with some other cables you have to use small plastic brackets to attach the cable to the wall. Insulation was also greatly improved. Higher-purity Oxygen Free Copper (OFC) was used to improve the conductivity of the cable, to reduce signal loss and signal degradation, to reduce electric resistance and to improve overall signal transmission. An Improved multi-strand design will allow a perfect transmission of a full range of audio frequencies, which results in a full, theater like sound. Notice that most other speaker cables have a single flat conductor and a much higher gauge, which means the conductor is thinner and will not aid in a good signal transfer.
This cable is used primarily to connect speakers to an audio receiver, but can also be used in power cable applications. Specs: - 14 AWG
- Atlona 15m (49.5ft) High-Purity Oxygen Free Copper conductors
- Improved paintable insulation
- Jacket Color: White
- Thickness of the cable is 2mm
- Overall width of the cable is 13mm
- Distance between conductors is 2mm
- Weight of a 15m (49.5ft) roll is 2.45lbs
|
Discontinued Products
