Atlona HDMI Cables with Built-In Amplifier up to 200ft
San Jose, CA- HDMI Cable with booster built in. For Release Atlona Amplified HDMI Cables. Here is a new addition to our Atlona cable line – Amplified HDMI cables. On the internet you can find a variety of HDMI extension options like: Fiber optic HDMI, HDMI over the CAT-5 line, Boosters and amplifiers that work with regular HDMI cables and more. In this release we will explain why those options, while still being great for installations, are inferior to these new cables. Let’s look at some of the advantages of Atlona amplified HDMI cables over some other commonly available options. Let’s quickly compare Fiber optic, CAT-5 and our amplified HDMI. These cables use a 5 volt line, which exists within every HDMI connection to power the amplifier. Amplifier is built to match the length of the cable and provide the right amplification for that length. This eliminates over boosting, which is common to some amplifiers and boosters. Because these cables use an internal power line, they do not require external power supply, which is commonly used in boosters, amplifiers and CAT-5 extenders. These cables also do not require separate boxes at each end, which are used in CAT-5 extenders. Atlona Amplified HDMI cables also use connectors with a much smaller footprint, which is a large advantage over the connectors that are used in the Fiber Optic cables and most of all they do not cost as much as Fiber Optics. One of the biggest advantages of these cables is that they are ready for the near future. Unlike every other extension application, Atlona amplified HDMI cables carry HDMI 1.3 rating. This rating translates into the cables ability to transfer a higher resolution signal, such as 1440p/WQXGA. Another advantage is an ability to carry higher refresh rates. While the upper limit of HDMI 1.3 was not specified, it is expected for the refresh rates to reach as high as 120Hz. This is especially a big plus in computers, where high refresh rates are needed to reduce screen flickering. I’m guessing that we will soon see computers and computer monitors with HDMI inputs and outputs. More Colors is another plus. Unlike previous HDMI rated cables could carry only up to 24-bit in color depth, which translates to 17 million colors. HDMI 1.3 can carry 30-bit, 36-bit and 48-bit color depth, which translates to 1B, 69B and 281T colors. Now that’s truly a lot of colors. Ok, but what about audio? Let’s take a look at the new audio support that HDMI 1.3 provides. HDMI 1.3 adds additional support for new, lossless compressed digital audio formats: Dolby® TrueHD and DTS-HD Master Audio™, which provide up to 8 channels of lossless surround sound. This will provide us with the highest quality audio experience – the same as in the movie theater. Atlona Amplified HDMI cables also carry a CL2 rating, which means that the jacket complies with the standard for in-wall installations. They are ROhS rated, which means that they contain no harmful materials like Lead. So in the end we have a better signal transfer, no over boosting, no need to tune amplifiers, ability to transfer higher resolutions, more colors, higher refresh rates, better audio, ratings for different installation applications. I can truly say that these cables are far more superior to other HDMI extension applications available today. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI, DDWG Rev1.0, CE, UL, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Marketing Manager 2151 O’Toole Ave Unit D San Jose, CA 95131 Manufacture Website: www.atlona.com Sales Website: www.lenexpo-electronics.com Toll free - 1.877.536.3976 Labels: Amplified HDMI Cables
Atlona mini HDMI to Standard HDMI Cables.
Type C to Type A ( Bi-Directional ).
Press Release
Hello again everybody. Today we are going to take a look at our brand new product that is still fresh out of the factory – mini HDMI cables, which are also referred to as “HDMI type C”. As we all know, regular HDMI cables are “HDMI type A” and dual-link HDMI cables, which are very rare and are not in general use - “HDMI type B”. Well, we wouldn’t be talking exactly about the type C, since we already have a review about that - this review will be about type A to C. Later on in the text I will tell you why you would need to convert one to the other.
HDMI Type C connectors are very interesting in construction. They are much smaller than HDMI Type A, but carry absolutely the same Audio/Video specs as HDMI Type A. This clearly defines that HDMI Type C will be widely used in portable electronics and such. I personally cannot wait to acquire a brand new camcorder that has HDMI. Now I have heard of rumors that TV’s will have type C jack on the front panel. Ok, that’s good, but how are you planning on connecting your camcorder or any other portable device to the rest of your home theater equipment. This is where type A to type C cable comes into play. Just imagine the compatibility to all of the HD equipment on the market and the stunning video quality that this interface will provide.
Let’s take a look at what these cables can do. Just like our flat and round HDMI cables, they are ready for the near future. All Atlona HDMI mini cables carry HDMI 1.3 rating. This rating translates into the cables ability to transfer a higher resolution signal, such as 1440p/WQXGA.
Another advantage is an ability to carry higher refresh rates. While the upper limit of HDMI 1.3 was not specified, it is expected for the refresh rates to reach as high as 120Hz. This is especially a big plus in computers, where high refresh rates are needed to reduce screen flickering. I’m guessing that we will soon see computers and computer monitors with HDMI inputs and outputs.
More Colors is another plus. Unlike previous HDMI rated cables could carry only up to 24-bit in color depth, which translates to 17 million colors. HDMI 1.3 can carry 30-bit, 36-bit and 48-bit color depth, which translates to 1B, 69B and 281T colors. Now that’s truly a lot of colors.
Ok, but what about audio? Let’s take a look at the new audio support that HDMI 1.3 provides.
HDMI 1.3 adds additional support for new, lossless compressed digital audio formats: Dolby® TrueHD and DTS-HD Master Audio™, which provide up to 8 channels of lossless surround sound. This will provide us with the highest quality audio experience – the same as in the movie theater.
Just like every other Atlona HDMI cable, they are RoHS rated, which means that they contain no harmful materials like Lead.
These cables are a great addition to our already large product line and in only a few weeks our warehouses will be receiving the very first batch of these cables.
Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name, meets or exceeds the standards set by US, Canadian and European Governments.
All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI 1.2a, HDMI 1.3, HDMI 1.3a, DDWG Rev1.0, CE, UL, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc…
Stanislav Palguyev
Toll free - 1.877.536.3976
Sales Website: http://www.lenexpo-electronics.com/
Manufacture Website: http://www.atlona.com/ Labels: http://www.lenexpo-electronics.com/2M-6FT-ATLONA-HDMI-TYPE-C-MINI-DIGITAL-AUDIO-VIDEO-CABLE-HDMI-1.3a-p-17282.html
Atlona mini HDMI Cables Type C.
Press Release
Hello again everybody, I know it has been a little while since the last product review. Today we are going to take a look at our brand new product that is still fresh out of the factory – mini HDMI cables, which are also referred to as “HDMI type C”. As we all know, regular HDMI cables are “HDMI type A” and dual-link HDMI cables, which are very rare and are not in general use - “HDMI type B”.
HDMI Type C cables are very interesting in construction. They are much smaller than HDMI Type A, but carry absolutely the same Audio/Video specs as HDMI Type A. This clearly defines that HDMI Type C will be widely used in portable electronics and such. It is also rumored that televisions will have this kind of port on the front panel. I personally cannot wait to acquire a brand new camcorder that has HDMI.
Let’s take a look at what these cables can do. Just like our flat and round HDMI cables, they are ready for the near future. All Atlona HDMI mini cables carry HDMI 1.3 rating. This rating translates into the cables ability to transfer a higher resolution signal, such as 1440p/WQXGA.
Another advantage is an ability to carry higher refresh rates. While the upper limit of HDMI 1.3 was not specified, it is expected for the refresh rates to reach as high as 120Hz. This is especially a big plus in computers, where high refresh rates are needed to reduce screen flickering. I’m guessing that we will soon see computers and computer monitors with HDMI inputs and outputs.
More Colors is another plus. Unlike previous HDMI rated cables could carry only up to 24-bit in color depth, which translates to 17 million colors. HDMI 1.3 can carry 30-bit, 36-bit and 48-bit color depth, which translates to 1B, 69B and 281T colors. Now that’s truly a lot of colors.
Ok, but what about audio? Let’s take a look at the new audio support that HDMI 1.3 provides.
HDMI 1.3 adds additional support for new, lossless compressed digital audio formats: Dolby® TrueHD and DTS-HD Master Audio™, which provide up to 8 channels of lossless surround sound. This will provide us with the highest quality audio experience – the same as in the movie theater.
Just like every other Atlona HDMI cable, they are RoHS rated, which means that they contain no harmful materials like Lead.
These cables are a great addition to our already large product line and in only a few weeks our warehouses will be receiving the very first batch of these cables.
Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name, meets or exceeds the standards set by US, Canadian and European Governments.
All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI 1.2a, HDMI 1.3, HDMI 1.3a, DDWG Rev1.0, CE, UL, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc…
Stanislav Palguyev
Toll free - 1.877.536.3976
Sales Website: www.lenexpo-electronics.com
Manufacture Website: www.atlona.com
Labels: http://www.lenexpo-electronics.com/1M-3-FEET-ATLONA-HDMI-TYPE-C-MINI-DIGITAL-AUDIO-VIDEO-CABLE-HDMI-1.3a-p-17281.html
Atlona Flat HDMI Cables 1.3 ( Better then any standard HDMI Cable )
Atlona Flat HDMI Cables.
Press Release
Well, here’s the product that most of us with HDMI equipment been waiting for – Flat HDMI cables. There has been a lot of talk on the internet about this type of cables, but unfortunately it is very hard to find clearly defined advantages or disadvantages of these cables.
One of the biggest advantages of these cables is that they are ready for the near future. All of Atlona flat HDMI cables in lengths up to 50ft (15m) carry HDMI 1.3 rating. This rating translates into the cables ability to transfer a higher resolution signal, such as 1440p/WQXGA.
Another advantage is an ability to carry higher refresh rates. While the upper limit of HDMI 1.3 was not specified, it is expected for the refresh rates to reach as high as 120Hz. This is especially a big plus in computers, where high refresh rates are needed to reduce screen flickering. I’m guessing that we will soon see computers and computer monitors with HDMI inputs and outputs.
More Colors is another plus. Unlike previous HDMI rated cables could carry only up to 24-bit in color depth, which translates to 17 million colors. HDMI 1.3 can carry 30-bit, 36-bit and 48-bit color depth, which translates to 1B, 69B and 281T colors. Now that’s truly a lot of colors.
Ok, but what about audio? Lets take a look at the new audio support that HDMI 1.3 provides.
HDMI 1.3 adds additional support for new, lossless compressed digital audio formats: Dolby® TrueHD and DTS-HD Master Audio™, which provide up to 8 channels of lossless surround sound. This will provide us with the highest quality audio experience – the same as in the movie theater.
ATF series cables – the series of Atlona flat HDMI cables, also carry a CL2 rating, which means that the jacket complies with the standard for in-wall installations. They are ROhS rated, which means that they contain no harmful materials like Lead. They are available in Black and White colors to help you hide them if you are not planning on running them in walls. The jackets of these cables are paintable, to help you hide them, when running these cables on the walls. Because of the Flat design, the crosstalk in these cables is reduced. A Crosstalk is an interference that a cable generates. If you would look at the design of the flat cables, you will find that there’s a larger distance between the sets of twisted conductors. This particular design reduces the pickup of interference that neighboring set of conductors generate.
So in the end we have a better signal transfer, ability to transfer higher resolutions, more colors, higher refresh rates, better audio, ratings for different installation applications. It seems to me like this is the only piece that our Home Theaters are missing.
Atlona ATF series cables have been released a few weeks ago and so far the only feedback that we have had was great!
Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments.
All of our equipment and cables are built under the following standards and certifications(if applicable): HDMI, DDWG Rev1.0, CE, UL, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc…
Stan Palguyev
www.atlona.com (manufacturing division)
www.lenexpo-electronics.com (sales division)
Toll free - 1.877.536.3976 x116
Labels: http://www.lenexpo-electronics.com/1M-3FT-ATLONA-FLAT-HDMI-CABLE-BLACK-COLOR-.-HDMI-1.3-RATED-p-16704.html
Atlona 8x1 HDMI Switcher ( new )
Atlona 8-in/1-out HDMI switcher with RS-232 control. Model# AT-HDMI81. Press Release: Let us introduce yet another switcher to our line of HDMI equipment – a switcher with 8 inputs and 1 output. There are so many switchers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this switcher is superior to most of the other switchers on the market at a similar price point. There are some advantages of this switcher versus the others, which I would like to point out. One of the biggest advantages is a signal enhance mode, which essentially is a signal amplification mode. This mode should be used when running a cable up to 50 feet in length and when display has problems picking up the signal because of the length. This mode will virtually guarantee that as long as your cable is no longer than 50 feet from the switcher, you will have sufficient signal strength and will not require a booster. Another advantage is RS-232 Port. This connection is used with HTPC and Home Automation applications. It enables a full control over the switcher from Home Theater PC or any other controller, as long as it has RS-232 port. Just like every other switcher, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/8-1-ATLONA-HDMI-SWITCH-W-REMOTE-CONTROL-p-16825.html
Atlona 6x1 HDMI Switch ( new release )
Atlona 6-in/1-out HDMI switcher with RS-232 control. Model# AT-HDMI61. Press Release: Let us introduce yet another switcher to our line of HDMI equipment – a switcher with 6 inputs and 1 output. There are so many switchers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this switcher is superior to most of the other switchers on the market at a similar price point. There are some advantages of this switcher versus the others, which I would like to point out. One of the biggest advantages is a signal enhance mode, which essentially is a signal amplification mode. This mode should be used when running a cable up to 50 feet in length and when display has problems picking up the signal because of the length. This mode will virtually guarantee that as long as your cable is no longer than 50 feet from the switcher, you will have sufficient signal strength and will not require a booster. Another advantage is RS-232 Port. This connection is used with HTPC and Home Automation applications. It enables a full control over the switcher from Home Theater PC or any other controller, as long as it has RS-232 port. Just like every other switcher, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/6-1-ATLONA-HDMI-SWITCH-W-REMOTE-CONTROL-p-16824.html
Atlona 4x1 HDMI Switch with Digital Audio ( new )
Atlona 4-in/1-out HDMI switcher with Digital Audio and RS-232 control. Model# AT-HDMI41D.
Press Release
Let us introduce yet another switcher to our line of HDMI equipment – a switcher with 4 inputs and 1 output. There are so many switchers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this switcher is superior to most of the other switchers on the market at a similar price point.
There are some advantages of this switcher versus the others, which I would like to point out. One of the biggest advantages is a signal enhance mode, which essentially is a signal amplification mode. This mode should be used when running a cable up to 50 feet in length and when display has problems picking up the signal because of the length. This mode will virtually guarantee that as long as your cable is no longer than 50 feet from the switcher, you will have sufficient signal strength and will not require a booster.
Aside from HDMI switching capabilities, this switcher also has 4 inputs and 1 output for Digital Coax (PCM or S/Pdif) and 4 inputs and 1 output for Fiber Optic (Toslink) audio. While it will not convert these audio inputs to HDMI audio, it will still act as a full router for both – HDMI, S/Pdif and TosLink.
Another advantage is RS-232 Port. This connection is used with HTPC and Home Automation applications. It enables a full control over the switcher from Home Theater PC or any other controller, as long as it has RS-232 port.
Just like every other switcher, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation.
In the end, we have a piece of equipment at the same price point, just with more capabilities.
Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments.
All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc…
Stanislav Palguyev ( Tel: 1-877-536-3976 )
Sales Website: Lenexpo Electronics
Manufactures Website: Atlona Labels: http://www.lenexpo-electronics.com/4-1-ATLONA-HDMI-DIGITAL-AUDIO-SWITCH-W-REMOTE-CONTROL-p-16823.html
Atlona 4x1 HDMI Switch ( New Product )
Atlona 4-in/1-out HDMI switcher with RS-232 control. Model# AT-HDMI41. Press Release: Let us introduce yet another switcher to our line of HDMI equipment – a switcher with 4 inputs and 1 output. There are so many switchers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this switcher is superior to most of the other switchers on the market at a similar price point. There are some advantages of this switcher versus the others, which I would like to point out. One of the biggest advantages is a signal enhance mode, which essentially is a signal amplification mode. This mode should be used when running a cable up to 50 feet in length and when display has problems picking up the signal because of the length. This mode will virtually guarantee that as long as your cable is no longer than 50 feet from the switcher, you will have sufficient signal strength and will not require a booster. Another advantage is RS-232 Port. This connection is used with HTPC and Home Automation applications. It enables a full control over the switcher from Home Theater PC or any other controller, as long as it has RS-232 port. Just like every other switcher, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/4-1-ATLONA-HDMI-SWITCH-W-REMOTE-CONTROL-p-16822.html
Atlona 1x8 HDMI Distribution Amplifier ( New Product )
Atlona 1-in/8-out HDMI distribution amplifier. Model# AT-HDMI18. Press Release ( February, 14 2007 ) Let us introduce yet another distribution amplifier to our line of HDMI equipment – an amplifier with 1 input and 8 outputs. There are so many distribution amplifiers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this distribution amplifier is superior to most of the others on the market at a similar price point. There are some advantages of this distribution amplifier versus the others that I would like to point out. One of the biggest advantages is a HDMI detective, which is built into the every output of the amplifier. The HDMI Detective is required for most displays that are similar to the computer monitor. The reason why, is that those displays require communication with a source and in a HDMI splitting application, that communication would be unavailable. This is where the HDMI detective comes into play. It emulates the source communication signal which is required for those displays to work. Some other distribution amplifiers would not have HDMI detective built in and would require for you to purchase them separately. Just like every other distribution amplifier, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. The maximum recommended length of the HDMI cables at the outputs of the amplifier is 15m (50ft) In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stan Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/1-8-ATLONA-HDMI-DISTRIBUTION-AMPLIFIER-p-16827.html
Atlona 1x4 HDMI Splitter ( new Product )
Atlona 1-in/4-out HDMI distribution amplifier. Model# AT-HDMI14. Press Release: Let us introduce yet another distribution amplifier to our line of HDMI equipment – an amplifier with 1 input and 4 outputs. There are so many distribution amplifiers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this distribution amplifier is superior to most of the others on the market at a similar price point. There are some advantages of this distribution amplifier versus the others that I would like to point out. One of the biggest advantages is a HDMI detective, which is built into the every output of the amplifier. The HDMI Detective is required for most displays that are similar to the computer monitor. The reason why, is that those displays require communication with a source and in a HDMI splitting application, that communication would be unavailable. This is where the HDMI detective comes into play. It emulates the source communication signal which is required for those displays to work. Some other distribution amplifiers would not have HDMI detective built in and would require for you to purchase them separately. Just like every other distribution amplifier, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. The maximum recommended length of the HDMI cables at the outputs of the amplifier is 15m (50ft) In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/1-4-ATLONA-HDMI-DISTRIBUTION-AMPLIFIER-p-16826.html
Atlona 1x8 DVI Splitter ( New Product )
Atlona 1-in/8-out DVI distribution amplifier. Model# AT-DVI18. Press Release: Let us introduce yet another distribution amplifier to our line of DVI equipment – an amplifier with 1 input and 8 outputs. There are so many distribution amplifiers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this distribution amplifier is superior to most of the others on the market at a similar price point. There are some advantages of this distribution amplifier versus the others that I would like to point out. One of the biggest advantages is a DVI detective, which is built into the every output of the amplifier. The DVI Detective is required for most displays that are similar to the computer monitor. The reason why, is that those displays require communication with a source and in a DVI splitting application, that communication would be unavailable. This is where the DVI detective comes into play. It emulates the source communication signal which is required for those displays to work. Some other distribution amplifiers would not have DVI detective built in and would require for you to purchase them separately. Just like every other distribution amplifier, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. The maximum recommended length of the DVI cables at the outputs of the amplifier is 15m (50ft) In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stan Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/1-8-ATLONA-DVI-DISTRIBUTION-AMPLIFIER-SPLITTER-p-16835.html
Atlona 1 to 4 DVI Distribution amplifier splitters
Atlona 1-in/4-out DVI distribution amplifier. Model# AT-DVI14. Press Release: Let us introduce yet another distribution amplifier to our line of DVI equipment – an amplifier with 1 input and 4 outputs. There are so many distribution amplifiers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this distribution amplifier is superior to most of the others on the market at a similar price point. There are some advantages of this distribution amplifier versus the others that I would like to point out. One of the biggest advantages is a DVI detective, which is built into the every output of the amplifier. The DVI Detective is required for most displays that are similar to the computer monitor. The reason why, is that those displays require communication with a source and in a DVI splitting application, that communication would be unavailable. This is where the DVI detective comes into play. It emulates the source communication signal which is required for those displays to work. Some other distribution amplifiers would not have DVI detective built in and would require for you to purchase them separately. Just like every other distribution amplifier, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. The maximum recommended length of the DVI cables at the outputs of the amplifier is 15m (50ft) In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stanislav Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/1-4-ATLONA-DVI-DISTRIBUTION-AMPLIFIER-SPLITTER-p-16833.html
Atlona DVI Splitter Amplifier ( new product )
Atlona 1-in/2-out DVI Distribution Amplifier. Model# AT-DVI12. Press Release: Let us introduce yet another distribution amplifier to our line of DVI equipment – an amplifier with 1 input and 2 outputs. There are so many distribution amplifiers available on the market from various companies, that it is becoming hard to distinguish between one and another. I’d say that this distribution amplifier is superior to most of the others on the market at a similar price point. There are some advantages of this distribution amplifier versus the others that I would like to point out. One of the biggest advantages is a DVI detective, which is built into the every output of the amplifier. The DVI Detective is required for most displays that are similar to the computer monitor. The reason why, is that those displays require communication with a source and in a DVI splitting application, that communication would be unavailable. This is where the DVI detective comes into play. It emulates the source communication signal which is required for those displays to work. Some other distribution amplifiers would not have DVI detective built in and would require for you to purchase them separately. Just like every other distribution amplifier, it supports resolutions up to 1080p. And with industrial components used in the manufacturing process, there is no issue with signal degradation. The maximum recommended length of the DVI cables at the outputs of the amplifier is 15m (50ft) In the end, we have a piece of equipment at the same price point, just with more capabilities. Atlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications (if applicable): HDMI1.2, HDMI1.3, DDWG Rev1.0, CE, UL, CL2, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Stan Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture Website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/1-2-ATLONA-DVI-DISTRIBUTION-AMPLIFIER-SPLITTER-p-16832.html
HDMI Video Scaler ( new product )
Special Press Release for: Atlona Audio/Composite Video/S-Video to HDMI Scaler/Converter. Model# AT-AVS-HDMI. Well, here is another addition to the Atlona world of home entertainment – an analog audio/video to digital audio/video converter with video scaler built in. Let’s face it, some of us have been searching for a unit with a similar functionality for a little while now. Unfortunately the only equipment that we could come across were professional video scalers, for which you had to dish out a few thousand dollars. Yes, that kind of product is worth every penny, but not every one needs that kind of equipment. And those of us that did not need that kind of equipment, began to ask for alternatives from manufacturers. Let us to be the first ones to introduce this kind of product. This audio/video converter has many advantages; one of the biggest advantages is of course its function – to convert regular analog video, which is transmitted via Composite or S-Video connection, into HDMI with no degradation. Audio signal is being implemented in to the hdmi as well, so you would only have one output connection to the TV ( which supports both audio and video ). Another advantage is an ability to act as a video scaler. This feature allows you to select the resolution that you would be sending to your television. As an example your VCR sends 480 lines of interlaced resolution. No matter how good the signal strength is, 480 lines will never look as good as processed 720 or 1080 lines. While the picture quality will not be HD (because originally it was a very low resolution), the scaler is still going to enhance the image and scale up the image quality. Acting as NTSC to PAL converter is another plus. This converter can take a standard resolution NTSC signal and convert it into a standard resolution Pal signal on HDMI. In order for it to convert into a High Definition Pal, you have to add a multisystem video converter in front of it. In the end, we have a piece of equipment with the same capabilities as a more expensive product, just with less audio/video inputs. Product link: http://www.lenexpo-electronics.com/ATLONA-VIDEO-S-VIDEO-ANALOG-AUDIO-TO-HDMI-CONVERTER-SCALER-p-16821.htmlAtlona Technologies is a subdivision of Lenexpo Electronics, created as one of our own cable and equipment brand names. Every cable and a piece of equipment manufactured under this brand name meets or exceeds the standards set by US, Canadian and European Governments. All of our equipment and cables are built under the following standards and certifications(if applicable): HDMI, DDWG Rev1.0, CE, UL, C-UL, ISO 9001 and ISO 9002. We are working with large companies like HP, Comcast, SBC, Delta etc… Lenexpo Electronics Stan Palguyev Toll free - 1.877.536.3976 Sales Website: http://www.lenexpo-electronics.com/Manufacture website: http://www.atlona.com/Labels: http://www.lenexpo-electronics.com/ATLONA-VIDEO-S-VIDEO-ANALOG-AUDIO-TO-HDMI-CONVERTER-SCALER-p-16821.html
|
HDMI DVI Component cables and adapters, DVI HDMI Component amplifiers switchers and scalers, Multisystem PAL NTSC Converters and much more!
Subscribe to
Posts [Atom]
|
