The ex•tend•it VDL•1000 improves the picture quality transmitted over a CAT5 KVM extender How it works
The supplied VGA cable connects from the VGA output of your KVM extender and into the input of the VDL-1000. The monitor is attached to the ouput of the VDL-1000. Each color (RGB) has three sets of buttons that will adjust the delay of the color. Note: When CAT-5 cable is used for high quality video transmission, usually the Red, Green and Blue signals are each sent down a separate pair (within one 4-pair cable). This may have a significant effect, as signals take a slightly different time to arrive at the receiving end and as a result suffer visible color separation between Red, Green and Blue.
This distortion increases for higher resolution signals and is often called "SKEW" - the effects are removed by adding a short, wide bandwidth delay to the signals that arrive at the monitor first. Package Includes:
Features:- Makes extended VGA displays look better
- Allows video delay of red, green, and blue colors
- Works on all VGA resolutions
- Accomodates two VGA simultaneously
- Installs in seconds
Specifications: - Actual Bandwidth: 350 MHz
- Input Video Signal: 1.2 Volts p-p / Input Sync Signal: 5 Volts p-p (TTL)
- Horizontal Frequency Range: 15-70 KHz
- Vertical Frequency Range: 30 - 170 Hz
- Video In: HD-15 male
- Video out: HD-15 female
- Dimensions: 8.5" W x 1.75" H x 4.625" D
- Shipping Weight: 5 lbs.
|
other
