Scaling and switching solution for component and HDMI sources
The Gefen Home Theater Scaler Plus allows you to upscale and switch your standard definition or high definition component and HDMI sources to resolutions up to 1080p. Anything from set-top boxes, DVD players to the next generation of gaming consoles including the Xbox 360 and PS3 can be plugged into the Home Theater Scaler.
The Home Theater Scaler Plus supports one component source with analog audio, one composite or S-video source with analog audio, and two HDMI sources with digital audio. The analog audio from the analog sources is digitized and outputted to the HDMI connection as well as the digital audio outs. The HDMI inputs also have separate digital audio inputs, so you can use DVI sources and separate digital audio and the Home Theater Scaler Plus will embed the digital audio into the HDMI output as well as the digital audio outs.
Easy to use on-screen menus accessible through the IR remote control allow for effortless setup and image adjustment to accommodate different viewing modes and screen sizes.
Package Includes:
Home Theater Scaler Plus
One 6 ft HDMI cable (M-M)
One 5V Power Supply
IR Remote control
User's Manual
Features:
Both digital and analog inputs are format converted and pixel re-scaled through the Home Theater Scaler. It outputs a large range of formats and resolutions that will easily match the native resolution/ format of your display to ensure highest picture quality.
DVI/HDCP/HDMI compliant input: Operates up to 165Mhz (Up to UXGA @60Hz)
Supports digital HD output up to 1080p.
50/60Hz Convertsion
Pal to NTSC or NTSC to Pal conversion
Integrated 8-bit triple-ADC/PLL.
Integrated DVI/HDCP/HDMI compliant receiver.
Dual high quality scaling engines.
Dual 3-D motion video adaptive de-interlacers with smooth low-angle edge.
Automatic 3:2 pull-down & 2:2 pull-down detection and recovery.
High performance frame rate conversion engine.
The Proprietary Advanced Color Engine technology gives: Brilliant and fresh color, Intensified contrast and details, Vivid skin tone, Sharp edge, Accurate and independent color control
Option to select Audio input from HDMI or TOSlink/SPDIF audio source.
3D noise reduction on analog inputs only.
Operates through on-screen OSD menu control and remote control.
Aspect Ratio Control
Digital Audio Delay to match audio/video timing
Less then one frame delay allowing for gaming
Specifications:
Digital Video Amplifier Bandwidth: 1.65 Gbps
Component Video Bandwidth: 350 Mhz
Input DDC Signal: 5 volts p-p (TTL)
Input Video Signal: 1.2 volts p-p
Single Link Range: 1080p/1920 x 1200
Input/Output HDMI Connector: type A 19 pin female
Analog Video Connector 1: 3 RCA Component
Analog Video Connector 1: 1 RCA Composite or 1 S-video
Digital Audio Connector: optical TOSlink and Coax SPDIF