The Atlona Component video w/digital audio Wall Plate Extender kit is a perfect solution to extend HDTV Component and digital audio over Cat5 or Cat6. AT-COMPAD-SR includes 2 x wall plates with 3 video and 1 audio jack on the front and Cat5/Cat6 connections on the back. The Atlona wall plate extender kit is capable of transmitting signal up to 600ft. There is no power needed.

The Atlona Component video Wall Plate Extender kit is a perfect solution to extend HDTV Component (YPrPb / YCrCb) over Cat5 or Cat6 wire. AT-COMP-SR includes 2 x wall plates with 3 video jacks on the front and Cat5/Cat6 connections on the back. The Atlona wall plate extender kit is capable of transmitting signal up to 1000ft. There is no power needed.

Atlona Extension system is designed for Component Video + Stereo Audio, Digital Audio signal over cost effective CAT5 cable. This AV Extender is smart, fast and cost-effective, eliminating costly and bulky Component Video and Audio cable and is the most efficient way to move multimedia content from player to display.

Atlona Extension system is designed for Component Video + Stereo Audio, Digital Audio signal over cost effective CAT5 cable. This AV Extender is smart, fast and cost-effective, eliminating costly and bulky Component Video and Audio cable and is the most efficient way to move multimedia content from player to display.

The Component Extender sender unit connects to any component video source using the supplied Component cable. The receiver unit connects to your HDTV component video display up to 330 feet away. One CAT-5e cable is used to connect the sender to receiver for perfect video extension up to 1080p.

A compact transmitter for sending component video signals over long distances (up to 1000ft) to a Cat5 Shinybow receiver or repeater

A compact receiver to receive Component Video signals over long distances (up to 1000ft) to a Cat5 Shinybow receiver

A compact transmitter for sending Component Video signals over long distances (up to 1000ft) to a Cat5 Shinybow receiver or repeater. SB-6230 has 2 Cat5 outputs to split signal between 2 or more Receivers or Repeaters.

A compact receiver to receive Component Video signals over long distances (up to 1000ft) to a Cat5 Shinybow transmitter. SB-6230R has Cat5 input and Cat5 Loop Output as well as Component Video Output

The AT-COMP300SR is a powered Component video extender that will transfer digital audio (optical and digital coaxial) and video signal up to 600ft over a single CAT5/e Cable.

The AT-COMP300R is a powered Component video receiver that will work with the AT-COMPD-19S to transfer digital audio and video signal up to 300 meters over a single CAT5/e Cable.

AT-COMPD-19S is a 1 in 9 out CAT5 distribution amplifier that allows transmission HDTV
component video & digital audio over CAT 5 unshielded twisted pair (UTP) networking cable.
Receiver units are required AT-COMP300R

A compact receiver to receive Component Video signals over long distances (up to 1000ft) to a Cat5 Shinybow transmitter. SB-6340R has Cat5 input and Cat5 Loop Output as well as 2 x Component Video Outputs

A compact transmitter for sending Component Video signals over long distances (up to 1000ft) to a Cat5 Shinybow receiver or repeater. SB-6340 has 4 Cat5 outputs to split signal between 4 or more Receivers or Repeaters and Component Video Output for local monitor.

A compact transmitter for sending Component Video + Digital/Analog Audio signals over long distances (up to 1000ft) to a Cat5 Shinybow receiver or repeater. SB-6330 has 2 sets of Cat5 outputs to split signal between 2 x SB-6330R receivers

The 1x2 Component Audio over CAT5 extends and duplicates your audio and component video signals at distances of up to 1000 feet away. Remote AV signals are received from the 1x2 Component Audio over CAT5 Sender unit, via industry-standard CAT5 network cables.

The Atlona AT-RGB50SR is a great solution for extending VGA or Component Video signal over single Cat5 or Cat6 cable up to 165ft without signal degradation. Atlona VGA Extenders can handle any resolution up to 1080p or 1600x1200. Extenders have Analog Audio and Optical connections

The 1x4 Component/Audio over CAT5 Distribution Amplifier sends up to 4 identical sets of sparkling clear component video up to 1080p and audio to remote locations via four CAT5 cables at distances of up to 1000 feet.

Extend your audio and video signal using the Gefen Component Audio Extender. Place your source anywhere and extend the signal up to 330 feet (100 meters) away. The Component Audio Extender will extend Analog Component as well as Stero and Digital Audio via SPDIF or TOSlink.

The SB-6930 is a CAT5 based distribution amplifier, Receiver and Repeater. Designed to work together with Transmitter unit ( SB-6950 ). Receiver unit can be up to 1000ft away from the transmitter unit and still maintain high resolution and quality video signal.

The SB-6920 is a CAT5 based distribution amplifier and Receiver. Designed to work together with Transmitter unit ( SB-6950 ). Receiver unit can be up to 1000ft away from the transmitter unit and still maintain high resolution and quality video signal.

The SB-6950 is a distribution amplifier and transmitter via Cat5, it is capable of transmitting component video, digital and analog audio, composite video + analog audio to a Receiver ( SB-6920 ) or Repeater ( SB-6930 ) up to 1000ft away.

The Wireless VGA Extender LR allows a VGA display or projector to be conveniently located up to 100 feet away from the source.

The Wireless VGA Extender SR allows a VGA display or projector to be conveniently located up to 30 feet away from the source.