1x2 Component Audio over CAT5 The 1x2 Component Audio over CAT5 extends and duplicates your audio and component video signals at distances of up to 1000 feet away. Remote AV signals are received from the 1x2 Component Audio over CAT5 Sender unit, via industry-standard CAT5 network cables.
The 1x2 Component Audio over CAT5 will extend Analog Component as well as Analog Audio or Digital Audio via S/PDIF or TOSlink and provide two full sets of AV signal output on the receiving end. Audio is transmitted digitally over the CAT-5 cable and both the analog and digital audio outputs are active on the receiver side. How it works
The 1x2 Component Audio CAT5 Distribution Amplifier Sender unit is placed at the source location. A standard CAT5 cable is run from the 1x2 Component Audio over CAT5 Sender to the 1x2 Component Audio over CAT5 Receiver unit. The 1x2 Component Audio over CAT5 Receiver unit connects to your remote HDTV component video displays, and audio inputs. Note: Both analog and digital audio outputs are active on the receiver side when two-channel analog audio is used. If multi-channel digital audio is used, then the analog audio outputs will be inactive. Package Includes:
- 1x2 Component Audio over CAT5 Sender
- 1x2 Component Audio over CAT5 Receiver
- 5V DC power supply
- User's Manual
Features: - Supports up to 1080p component video
- Supports analog L+R audio and multichannel digital audio via optical Toslink or S/PDIF jacks
- Simple plug-and-play installation
- Equalizations for different CAT-5 skews
- No loss of quality over long distances
Specifications: - Video Amplifier Bandwidth: 350 MHz
- Input Video Signal: 1.2 Volts p-p
- Input Sync Signal: 5 Volts p-p (TTL)
- Horizontal Frequency Range: 15-70 KHz
- Vertical Frequency Range: 30-170 Hz
- Video In/Out: 6 RCA component
- Audio In/Out: 4 RCA Audio, 2 SPDIF, 2 TOSlink
- Link Connector: RJ-45 Shielded
- Power Supply: 5V DC
- Power Consumption: 20 watts (max.)
- Dimensions: 3"W x 1"H x 3.75"D
- Shipping Weight: 5 lbs.
|
Audio/Video Extenders
